IDIS Co., Ltd.
For more information, please visit
www.idisglobal.com
3
Pass the cable through the top cover and then
fasten the camera to the top cover.
4
Screw the camera top cover onto the camera
body using the Allen wrench provided with the
product.
5
Insert the waterproof bushing provided with
the product into the cable and insert it into the
top cover hole as the figure.
•
Cable diameters that can be fastened to the bushing
are 4-6mm(0.15"-0.23"), and other sizes require a
separate sealing finish.
•
If the cable is bent excessively when tightening the
bushing, the waterproofing function may be weakened.
•
Bushings that do not tighten cables and unused holes
require a separate sealing finish.
6
Connect the cables and fix the top cover to the
bracket.
7
Turn on power.
Connect your specific model of camera to the bracket as follows:
1
1
2
2
3
3
3
Screw No.1 (2-point): DC-Y6513WRX using 2 screws
Screw No.2 (2-point): TC-D4222WRX using 2 screws
Screw No.3 (3-point): DC-D4213WRX, DC-D4513WRX using 2 screws
Dimensions
Unit: mm (inch)
60.5 (2.38)
50.5 (1.98)
162 (6.37)
25.5 (1)
90 (3.54)
63.64 (2.5)
63.64 (2.5)
40.31 (1.58)
40.31 (1.58)
Ver.1.0