Installation, Support, and Maintenance Guide
35
X1 Series Satellite Router
Mounting the External Power Module
5.5 Mounting the External Power Module
This section provides instructions for an outdoor installation of the power module, to a wall or
pole, and contains these sections:
•
Power Module Mounting Hardware
, read this section first to be
sure the necessary hardware is available
•
Mounting the Power Module to a Wall or Pole
5.5.1
Power Module Mounting Hardware
The power module of the X1 Outdoor Router may be mounted to a wall or a pole by using the
GTT-MNT-LP22 (GTT:GLBAC-WALLMOU-SCC) mounting kit. The kit includes:
•
1 mounting plate
•
2 stainless steel tie back straps
•
4 wood screws
•
4 wood/gyprock plugs (anchors)
•
4 M5x20 screws
•
4 flat washers for M5 screws
•
4 spring (lock) washers for M5 screws
•
1 spacer
CAUTION:
The Power Module must be wall or pole mounted with the cable and
power connectors on the bottom of the unit, facing downward.
CAUTION:
The Power Module should be installed below or side-by-side the X1
Outdoor Router if installed on poles.
5.5.2
Mounting the Power Module to a Wall or Pole
Attach the mounting plate, to the Power Module, using the M6x20 screws as shown in
. Then follow:
•
Wall Mounting the Power Module
, for wall mounting the
power module
•
Pole Mounting the Power Module
, for pole mounting the
power module
Summary of Contents for X1 Series
