iDirect Evolution X1, Installation, Support, And Maintenance Manual

Page: 67 / 90

Installation, Support, and Maintenance Guide 53
Evolution X1 Satellite Router
7 Maintenance
This chapter describes maintenance procedures necessary for ensuring the correct functioning
of the X1
Router at a VSAT location.
This chapter contains the following sections:
•
Section 7.1, Safety Guidelines to Observe During Servicing on page 53
• Section 7.2, Maintaining the X1 Router (Indoor) on page 53
• Section 7.3, Maintaining the X1 Outdoor Router on page 54
• Section 7.4, Repacking the X1 Router on page 55
7.1 Safety Guidelines to Observe During Servicing
When an X1 Router requires service, observe the safety guidelines in this section.
7.1.1 Servicing
Do not attempt to service the X1 Router internal assemblies, as opening and removing covers
may expose personnel to dangerous voltages or other hazards. There are no user serviceable
parts inside. Opening the X1
Router or Power Module will void the warranty. Refer all servicing
to qualified service personnel.
7.1.2 Conditions Requiring Service
Unplug the X1 Router from the power source and refer servicing to qualified service personnel
under the following conditions:
•
When the power supply cord or plug is damaged
• If the X1 Router does not operate normally when following the operating instructions
• If the X1 Router has been dropped or if the chassis has been damaged
• When the X1 Router exhibits a distinct change in performance
7.2 Maintaining the X1 Router (Indoor)
The X1 Router (Indoor) requires basic maintenance to keep it running efficiently and to
prolong its life.