iDirect Evolution X1, Installation, Support, And Maintenance Manual

Page: 41 / 90

Installation, Support, and Maintenance Guide 27
Evolution X1 Satellite Router
Unpacking X1 Router (Indoor) Equipment
11. Configure the router as indicated in Section 5.9, Configuring the X1 Router (Indoor) on
page 32 .
12. If the router needs repacking or maintenance see Chapter 7, Maintenance on page 53 .
5.2 Unpacking X1 Router (Indoor) Equipment
The X1 Router (Indoor) and related equipment, may be shipped in one or more containers,
depending on the type of bundle purchased. Once all of the boxes have been received,
perform the following tasks:
•
Place the boxes so they are facing upward: refer to the box orientation arrows on the
shipping container
• Inspect all shipping containers
• If any damage or other signs of mishandling are evident, inform the carrier and either
iDirect or the reseller
• Remove the tape and any exterior covering from the box lid
Remove items from the box only as needed. Confirm the X1 Router (Indoor) components and
accessory items listed on the order form have been received, including the optional
equipment ordered.
5.3 Components Typically Included in an Order
Prior to installation, account for all necessary components for a complete VSAT installation. If
any items are missing or damaged, contact the Network Operator/Distributor for
replacement.
A typical installation includes:
•
1 (one) X1 Router (Indoor)
• One Power Module: +24 VDC Power Module with either Option 1 or Option 2 power module
with connectors
• 1 (one) LAN Ethernet cable
• 1 (one) Quick Start Guide (11 X 17 inch brochure)
• For DC (option 2) Power Module: 1 (one) connector kit containing: one cable tie, one
terminal block plug (P/N Phoenix 1754465), one cable strain relief, P/N 1803947
• Additional components normally required are available in several sizes and types. Consult
the iDirect Account Manager for details. The components typically are:
•
One antenna
• IFL (Inter Facility Link) or coaxial cable appropriate for the installation
• One appropriate feed assembly for the antenna (OMT)
• One BUC (Block Up Converter)
• One LNB (Low Noise Block Converter)
NOTE: Save the X1 Router shipping boxes after unpacking the system. The boxes
may be needed if the unit needs to be moved or shipped in the future.