iDirect Evolution X1, Installation Manual, Page: 63 / 130

iDirect Satellite Router Installation and Commissioning Guide 47
iDX Release 3.3
9 Loading Packages with
Web iSite
This chapter describes how to log in to Web iSite and how to load the remote image software
package on the X1, X7, and e150 Satellite Routers.
This chapter includes the following sections:
•
“Logging In to Web iSite” on page 47
• “Loading the Package File” on page 49
9.1 Logging In to Web iSite
Perform the steps in the following section to establish communication with the Satellite
Router using Web iSite.
To log in:
1. Connect a crossover or straight-through Ethernet cable between the LAN port of the local
PC and the LAN port of the Satellite Router. (For an Evolution X7, connect to the port
labeled LAN 1.)
2. Open a Web browser.
3. Enter the IP address of the Satellite Router into the address bar of the Web browser in the
following format:
https:// IP Address /
where
IP Address
is the IP address of the Satellite Router. See Figure 27 .
Figure 27. Connecting to the Satellite Router using Web iSite
4. When the Login page appears:
a. For User , enter admin .
b. For Password , enter the admin password of the Satellite Router.
c. Click Login