iDirect Evolution X1, Installation Manual, Page: 46 / 130

30 iDirect Satellite Router Installation and Commissioning Guide
iDX Release 3.3
Configuring TRANSEC ACC Keys
6.2 Loading ACC Keys
If the current ACC Keys and pass phrase are not available, coordinate with the Network
Operator to obtain them over a secure link. The procedure for retrieving the current ACC Keys
from the hub is documented in the
iDX iBuilder User Guide, available on the TAC Web site.
Sample ACC Keys are shown in Figure 20 .
Figure 20. ACC Key Example
To Load the ACC Keys:
1. Open a terminal session to the Satellite Router and log in to the root account. (See
“Connecting to the Console Port” on page 17 for details.)
2. Enter the command:
telnet localhost
3. At the Username prompt, log in to the admin account.
4. At the command line prompt, enter the command:
csp enable
5. Enter the command:
keyroll_mgr setACCKey
6. A prompt appears for each of the three segments (lines) of the encrypted key and the
pass phrase. Respond to each prompt with the requested information. You can type
Q
to
quit at any time.
7. When asked to continue, enter:
Yes
A message appears stating that the Network Acquisition Key has been updated.
After loading the ACC Keys, continue to “Pointing the Antenna with iSite” on page 31 .