iDirect 3000 series, Installation And Safety Manual

Page: 30 / 82

22 iDirect 3000 series™ Satellite Router Installation and Safety Manual
Figure 5 DB-9 to RJ-45 Adapter and Connector
You may need additional tools and equipment to install related equipment and
cables. You may also require test equipment to check signal, power levels, and
communication links. See
Section 5.3.1, Console Port Cable Specifications and Pinout
for cable specifications and RJ-45 pinouts.
4.5 Unpacking iDirect 3000 Satellite Router Equipment
The 3000 series router may be shipped in one or more shipping containers, depending
on the type of bundle purchased. Once you have received all of the boxes, perform
the following tasks:
• Ensure the boxes are facing upward. (Refer to the box orientation arrows on the
shipping container.)
• Inspect all shipping containers. If any damage or other signs of mishandling are
evident, inform the carrier and either iDirect or the reseller.
• Remove the tape and any exterior covering from the box lid.
NOTE: Save the iDirect 3000 series™ Satellite Router shipping boxes after you
have unpacked the system. You will need these boxes if you want to
move or ship the system in the future.
Remove items from the box only as needed. Verify that you have received all of the
proper 3000 series router components and accessory items listed in your order,
including the optional equipment you ordered.