iDirect 3000 series, Installation And Safety Manual

Page: 27 / 82

iDirect 3000 series™ Satellite Router Installation and Safety Manual 19
4.2 Power Specifications
The iDirect 3000 series™ Satellite Router generates minimal heat; typical power
consumption is 20W for the IDU. Ensure that the installation site can accommodate
the power specifications of the IDU.
Table 6 details the power specifications for the
iDirect 3000 series™ Satellite Router.
Table 6 Power Specifications
Category Description
Input Voltage +24 VDC (from External Power Supply)
Power Supply Model
Number Use only with the following model numbers:
• Ault Incorporated: PW122RA2400F02; PW122KA2400F02
• Operating Tech: OTE-120-24-3
Input Voltage Range 100 VAC – 240 VAC Single Phase
Frequency 50 Hz – 60 Hz
Current Consumption
at 90 VAC:
at 254 VAC:
≤
3.0 Amps maximum
1.25 Amps typical (with 4W BUC and LNB)
0.50 Amps typical (with 4W BUC and LNB)
Protection • Internal, primary current fuse, inside power supply
• Over current protection
• Short protection
Power Factor Correction Complies with EN61000-3-2 and EN61000-3-3
Efficiency 86% typical
Input Transient Response 0.5 msec for 50% load change typical
AC Input Connector IEC-320-C14, 3 pins receptacle on External Power Supply
AC Power Cord 18 AWG, country dependent