idinio 140110, Manual

Page: 6 / 32

Use of the product / Installation
1. Download and install the “Idinio“ app from the Apple App Store or Google Play
Store on your mobile device.
2. Activate the “Idinio“ app.
3. Create a new account or log in to your existing account.
4. Click on “+” to add the product.
5. Select the product type from the product list.
6. Check the product and connect it to the mains. (possibly at a temporary
location with regard to the supplied USB cable MAX 5V 1.0A DC input )
7.
• If the status indicator is not flashing:
Press the reset* button for 10 seconds.
• If the status indicator is blinking:
Confirm in the app.
8. Confirm the Wi-Fi network and password.
9. Scan the QR code in the App with the camera. The product gives a sound
signal and you must confirm this in the App
10.Enter the name of the product. Note: The name of the product will also be
used for push notifications .
11. Place the product at the desired location
A x 2 B x 2
C x 3
i
AC 8V~24V
External
power port
Microphone
Button
Status Light
Camera
SD card slot
Speaker
Reset
Mini USB
AC 8V~24V
B
A
A
C
C
C
B
A
A
C
A x 2 B x 2
C x 3
i
AC 8V~24V
External
power port
Microphone
Button
Status Light
Camera
SD card slot
Speaker
Reset
Mini USB
AC 8V~24V
B
A
A
C
C
C
B
A
A
C
Option 1: Flat mounting
1.Mark screws position
1.Mark screws position
4.Fixed bracket 5.Install the doorbell into the bracket
2.Nailed expansion screw
3.Fit the mounting bracket to
the angle adjustment device
2.Nailed expansion screw
3.Fixed bracket
4.Install the doorbell into the bracket
Option 2: Mounting at
can angle
*