Operator Manual ilex with IPS500A
L280-0688 REV C
5.
Basic Setup Instructions
Electronics Installation
All electronic devices are to be installed according to their perspective manufacturer’s user
manuals.
When installing electronic accessories or placing other items on the top shelf, keep these items at
least 2 inches (50mm) away from the vertical edge below the speakers (as shown above to allow
room for the monitor when it is in the lowest position and to ensure easy access to controls.
Use caution when raising or lowering monitor to prevent
collision with personnel, walls, ceiling and other equipment.
Plugging a cauterization device into the internal power strip
may cause the monitor to shut down temporarily. Plug a
cauterization device into a separate wall outlet. A separate
branch circuit may be needed.
Always position the cart in a way that the electrical outlet its
power cord is plugged into can be easily accessed in the event
that it needs to be disconnected quickly.
