Use of Battery
6
4. How to use
Connection of Power and the way to charge
1. Connect Receiver with a power cable.
2. Turn the power of receiver on.
3. Start the charging after putting the transmitter on the receiver. At this time,
charging LED will be red color..
4. When the charging is completed, the LED of receiver will be green..
How to connect and disconnect
1. Connect the transmitter with the receiver..
2. When LED(Connection) of receiver is blinking 4times, paring between the
transmitter and the receiver will be done..
After pulling out the receiver from transmitter When LED(Connection) turns
into Green color, voice can be transferred to the receiver through
microphone of transmitter.
How to alarm the emergency
1. Push the emergency button of transmitter during connecting transmitter
and receiver..
2. Through EM terminal of Receiver, 12V Voltage will be output and
transmitter will be vibrates continuously.
3. When you are going out from Emergency, push emergency button of
transmitter once again.
4. Then the signal of EM terminal of receiver will be disappear and vibration
of transmitter will stop.
How to show Battery short
