Installation
X- Smart Pro
V 2.0
20
4.3
Connect the computer
4.3.1
Connect the computer
1. Connect a USB cable between the computer and the power
board (A).
2. Connect the dispenser and the computer to the wall socket.
4.4
Turning on the machine
To turn on the machine:
1. Connect the power cable to the wall socket. When the machine is operational, you hear two 'beeps'.
2. Make sure that the emergency stop switch is released.
3. Make sure that the computer is on.
4. Run the dispense software.
4.5
First use
For the first use:
1. Fill and place the brush unit. See
Cleaning the brush container: daily
on page 11.
2. Fill the canisters correctly. See
Refilling a canister
on page 13.
A
