iTeM
NaMe Of ParT
iTeM
NaMe Of ParT
1
Locknut
21
Relief Valve
2
Lockwasher
22
O-Ring For Relief Valve / Cover Plates
3
End Cap
23
Casing Bushing
4
Lip Seal (2-Req’d)
24
Capscrews For Relief Valve / Cover Plate (8-Req’d)
5
Bearing Spacer Collar (Outer)
25
Cover Plates (2-Req’d)
6
Ball Bearing - KE & KKE / Roller Bearing - LQE (2-Req’d)
26
Rotor and Shaft Assembly
7
Bearing Spacer Collar (Inner)
27
Idler and Bushing Assembly
8
Half Round Ring (2-Req’d)
28
Idler Bushing
9
Nylon Slug (2-Req’d)
29
O-Ring For Head
10
Setscrew, M8 - 1.25 x 8 mm (2-Req’d)
30
Lube Pin
11
Setscrew, M8 - 1.5 x 14 mm (2-Req’d)
31
Head and Lube Idler Pin Assembly
12
Bearing Housing
32
Pipe Plug, Hex Head, 1/4” BSP
13
Capscrews For Seal Plate (2-Req’d)
33
O-Ring For Jacketed Head Plate
14
Mechanical Seal Plate
34
Jacketed Head Plate
15
O-ring For Seal Plate
35
Head Capscrews
16
Mechanical Seal
36
Foot (4176 Models Only)
17
Casing and Bushing Assembly
37
Dowel Pins (4176 Models Only)
18
Grease Fitting, 1/8” NPT
38
Capscrews For Foot (4176 Models Only)
19
Flush Line Assembly
39
Lockwashers For Foot (4176 Models Only)
20
Pipe Plug, Hex Head, 1/4” BSP (2-Req’d)
Not lllus.
Pipe Flange Gasket (2-Req’d)
SECTION TSM 710
ISSUE
D
PAGE 5 OF 8
figure 6
exPLODeD vieW Of viKiNg SerieS 4076 / 4176 PuMPS
TabLe 2
PRODUCT
OBSOLETED
3Q16
