REV6 OPERATION / MAINTENANCE MANUAL
6
CONTENTS
Component
Item
PN
Description
Materials of Construction
Motor Mounting
Screws
8
98004269
M6x25mm
QTY 4
316 stainless steel
Controller
9a
98004271
Standalone
Controller
Standalone Controller
48VDC/600W Power
Panel control for motor speed
Optional PLC control
9b
98004275
Extended
Controller
Extended Controller
48VDC/600W Power
PLC control
Motor
10
98004270 600W Motor
Standard 3 meter cables included (not
shown)
FEP Jacket
IP67 rated liquid and dust protected
The Rev6 can be ordered as an individual pump to replace a current installation. In order to have a fully
functioning unit (i.e., for a new installation) a motor, controller, connecting cables, power supply and
fluid port adapters are required. The pump will not operate without a motor and controller.
Table 2 – Standard System Configurations
Product
Description
Included
Additional
Required Items
REV6A0 Pump with PP union nut and 316 SS bolts
(Standalone Control)
-
Pump
-
Attachment Screws
-
Pump Manual
-
Pump motor
-
Standalone pump
controller
-
Power cable
-
Sensor cable
-
Power supply
-
Fluid port
adapters
REV6A1 Pump with PP union nut and 316 SS bolts
(Extended Control)
-
Pump
-
Attachment Screws
-
Pump Manual
-
Pump motor
-
Extended pump
controller
-
Power cable
-
Sensor cable
-
Power supply
-
Fluid port
adapters
Wide varieties of industry standard fluid interfaces are available in the fluid port adapter. The fluid port
adapter assures seamless fit between plant infrastructure and the Rev6 pump. All fluid port adapters
are manufactured out of ultrapure PFA for the highest chemical compatibility and purity and can be
used interchangeable between any Rev6 pump.
Two seal types are available on the pump side. The first is a PTFE gasket seal to ensure chemical
compatibility. The second is a semiconductor grade FFKM o-ring seal. The seal is specifically designed
to maintain sealing characteristics even at elevated temperatures. The types of adapters currently
available are shown below.