Page
10
of
116
©HALE PRODUCTS, INC. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
GENERAL DATA
COMPRESSOR
Model
Enduro 12
Maximum Operating Speed
6500 rev/min
Nominal speed of operation
5000 rev/min
Nominal power consumption
75HP
[56.0kW]
Direction of rotation
Counter-clockwise (viewed on pulley)
Volume output
210 SCFM [5946 l/min] @ 125 PSI [8.6 Bar]
Operational pressure range
75-150 PSI [5.1-10.3 Bar]
PUMP
Minimum idle speed
600-700 RPM
COOLING SYSTEM
Type
Oil / Water Plate Heat Exchanger
Cooling water flow-rate
13 G/min at 100Psi [50 l/min at 7.0 Bar]
FOAM PROPORTIONING SYSTEM 3.3 - CLASS A AND B FOAM COMPATIBLE
Manufacturer
Hale Products Inc.
Model
Foam unit 3.3
Type
Electronic foam proportioning system
Operating voltage
12 and 24 volt systems available
Fuse rating 12V / 24V
60 / 40 amp
Current draw (Operating) 12V / 24V
30 / 15 amp
Current draw (Max) 12V / 24V
60 / 30 amp
Wire size
12V / 24V
Minimum 8.5mm
2
Max. Foam Agent Flow rate
3.3 GPM [12.5 LPM]
FOAM PROPORTIONING SYSTEM 5.0 - CLASS A AND B FOAM COMPATIBLE
Model
Foam unit 5.0
Max. Foam Agent Flow rate
5.0 GPM [19.0 LPM]
Other data as per Foam unit 3.3
FOAM PROPORTIONING SYSTEM 6.5 - CLASS A AND B FOAM COMPATIBLE
Model
Foam unit 6.5 <1>
Max. Foam Agent Flow rate
6.5 GPM [24.6 LPM]
Current draw (Max) 12V / 24V
90 / 45 amp
NOTE <1> THE 12V SYSTEM USES A 24VDC MOTOR AND A 12 VDC TO 24 VDC CONVERTER.
For more information on the SmartFOAM units, refer to SmartFOAM Manual FSG-MNL-00158.
FOAM PROPORTIONING SYSTEM DUAL 6.5 - CLASS A AND B FOAM COMPATIBLE
Model
Dual Foam unit 6.5
Max. Foam Agent Flow rate
13.0 GPM [49.2 LPM]
Other data as per Foam unit 6.5
Summary of Contents for HALE SmartCAFS
Page 106: ......