Idex Hale Sam, Technical Manual

Page: 49 / 223

29
Reference section 5, System Installation, of Style 9335 Navigator Pro With Pressure, Flow CAFS
And Valve Control Installation, Operating, And Maintenance Instructions (P/N 126914) found on
the flash drive provided with the system or on the Hale website (www.haleproducts.com).
2.4.8
Navigator (Optional Equipment)
One Navigator for every Akron Brass Swing-Out™ valve that is to be controlled by a Navigator.
Note: Navigators are primarily for backup control of discharges or primary control of Pony in-
takes, when the number of intakes exceeds the automated capability of the SAM system (de-
scribed below). The navigators shown on Figure 21 provide redundant electrical control for the
associated (Akron Brass Swing-Out™ valve) controlled discharge. Additionally, a Navigator pro-
vides redundant pressure indication for the associated Akron valve.
Figure 21. 9323 And 9335 Navigator Pro Displays
Additionally, any Pony intake in addition to the first six intakes (with an index of greater than 4),
requires a Navigator Pro for each Pony. In place of the 9323 or 9335 Navigator Pro displays (re-
quired for discharges), a Mini Navigator Pro (Figure 22) may be utilized for the added Pony in-
takes.
Figure 22. 9327 Mini Navigator Pro Display
THE STYLE 9327 NAVIGATOR MINI VALVE CONTROLLER DOES NOT SUPPORT PRES-
SURE INDICATION. DO NOT USE A STYLE 9327 NAVIGATOR MINI VALVE CONTROLLER
FOR DISCHARGE VALVE PURPOSES OR CALIBRATIONS.
2.4.9 Governor Function
The SAM Pump Controller controls engine speed automatically in SAM Auto Mode (no human in-
terface is provided in this mode) and displays/provides the human interface for SAM Manual
Mode. The SAM Pump Controller display provides input to the MatrIIx Governor module to control