Idex Hale Sam, Technical Manual

Page: 164 / 223

144
Figure 120. System Options Screen
C. On BAM Request/Wi-Fi Options screen (Figure 121), touch BAM REQUEST button.
Wait for progress bar (black bar below button turns green to indicate progress) to
complete.
Figure 121. BAM Request Screen
D. When complete, DONE is displayed (replaces progress bar) to indicate update
was successful.
4.14. Updating Another SAM Control Center After SAM Setup/Configuration Changes
Changes to Quicksets or other SAM customizable/configurable items (valve names and colors,
foam presets, etc.) must be updated for the remaining SAM Control Centers or the changes
made on one of the SAM Control Centers will not appear on the auxiliary (or master if update was
to an auxiliary) screen(s). To update the remaining SAM Control Centers, perform the following.
A.
Place updated SAM Control Center in Manual Mode. See Figure 25 (page 34).
B. Place all other SAM Control Centers in Manual Mode.