Idex Hale Sam, Operation Installation Maintenance Manual

Page: 87 / 141

71
NOTE
Touching NO cancels the command and does nothing.
6.3.1.2.2 Bypass Opening
If desired (or as a bypass, when HYDRANT DETECTION SENSOR LOST. USE OVERRIDE is dis-
played), the opening time may be reduced or bypassed as follows.
A.
On SAM Control Center, while OPENING is displayed for an intake, touch OPEN-
ING button. (See Figure 74, page 69.)
B. On popup window, touch YES button. (See Figure 77.)
NOTE
Touching NO cancels the command and does nothing.
6.3.1.3 Using Discharge Quicksets, Presets, And The SET PRESSURE Icon Group
Quicksets are discharges set up by authority of the AHJ. The Quickset discharge (including auto-
mated activation of the associated discharges preset pressure) has been pre-programed to dis-
play in the Quickset area of the Auto Mode Home screen.
6.3.1.3.1
Activating A Quickset
DO NOT EXCEED OPERATING PRESSURE LIMITS OF PUMP, INSTALLED PLUMBING,
HOSE(S), OR EQUIPMENT IN USE.
After ensuring hose(s) are attached and deployed, perform the following.
A.
Touch desired Quickset bubble (lower right section of the screen, see the right-
side of Figure 78). Button highlights (see the left-hand side of Figure 78).
Figure 78. Activating Quickset Discharges (Touch–Drag–Drop)
B. Drag button onto Quickset target (PUSH TO PUMP) (see center of Figure 78).
C. Release button over Quickset target (PUSH TO PUMP) (see center of Figure 78
Quickset actives discharge (see the right-hand side of Figure 78).
SAM increases engine speed to provide the required pressure and the discharge valve opens to
charge the line, then SAM controls as required to maintain the set line backpressure.
Once one discharge is opened, the discharge appears on the screen in the discharge area. SAM
can automatically control up to six (6) discharges. To add more discharges simply: 1. Activate an-
other Quickset. or 2. Touch the ADD LINE button.
6.3.1.3.2
Using The ADD LINE Button/Target
Touching the ADD LINE button displays the SELECT DISCHARGE screen (see left-hand side of Fig-
ure 79). The SELECT DISCHARGE screen shows all available discharges.