Idex Hale Sam, Operation Installation Maintenance Manual

Page: 31 / 141

15
Table 3. Touchscreen Icon Definitions–CONTINUED
Icon Definition Icon Definition
OK to Pump Pump OK
Pump Details Button Pump History Button
MODE RPM Button MODE PSI Button
Increase Arrowhead Decrease Arrowhead
Password Entry Button Opens Governor Menu
Save Button Back Button
Accept New Value Delete New Value
Configuration Mode Button Pump Test Data Sheet
Select Device Menu Housekeeping Menu
Export Data Log To USB Drive Send Broadcast Area Mes-
sage
Clear Select Device List Start Software And Display
SAM Home And/Or Landing
Screen
Clear Data Log Populate Select Device List
Save Select Device List Start Software To Allow
Change/Update
Access Second Page Of Op-
tions
Send Broadcast Area Mes-
sage And Display SAM Home
And/Or Landing Screen
4.1.1 Icon Groups
In addition to individual icons, the SAM Control Center screens utilize icon groups as described
below.
4.1.1.1
Set Pressure Icon Group
Figure 3 shows the set pressure icon group which is used to set the pressure for an associated
discharge or as a target for a preset button depending on the context.
Figure 3. Set Pressure Icon Group