Page 6
12
A typical installation showing all the
components that are recommended in a
system, including valves, pressure gauges, air
regulators, filters, and surge suppressors.
In a submerged application, the air exhaust port
of the pump must be ported above the fluid line.
Be certain that the fluid being pumped is
compatible with the materials on both the airside
and the wetted side of the pump before the pump
is submerged.
A flooded suction installation has the pump
datum line below the fluid level. IMPORTANT- in
flooded suction installations the pressure at the
fluid inlet of the pump should never exceed
69 kPa (10 psi).
In suction lift installations the pump
datum is above the fluid line. IMPORTANT- each
pump has different lift capabilities. Be sure to
verify the lift capability of a particular pump
before installing it into a system.
Mounting
Bolts
Fluid
Suction
Fluid
Discharge
Air
Supply
Suggested
Installation
Surge
Suppresser
Shut
Off
Valve
Pressure
Gauge
Flexible
Connection
Union
or
Pipe
Flange
Connection
Filter
Regulator
Lubricator
Air
Exhaust
Muffler
Shut
Off
Valve
Shut
Off
Valve
Flooded
Suction
Installation
Pump
Datum
Fluid
Discharge
Air
Exhaust
Air
Inlet
Suggested
Submerged
Installation
Suction
Lift
Installation
Pump
Datum
