#8
APPLYING THE PRODUCT
Ensure the work area is well ventilated in accordance with OSHA,
NIOSH, or AHJ standards.
Apply product to the surface using slow and smooth sweeps to wet,
but not saturate the surface.
Use the EPA guidance in order to determine proper contact time for
disinfection.
The wand trigger can create a pinching hazard. Use gloves or grip the
trigger near the bottom when applying the product.
#9
TURNING OFF SYSTEM
When you have finished operating the system, flip the switch to the off
position. This deactivates the pump.
With the wand pointed in a safe direction, relieve pressure in the sys-
tem by pulling the wand trigger.
#10
STORAGE
After the system is safely shutdown, return the hose, wand, and
extension cord back to the storage area.
If the system is going into long term storage, ensure the chemical
is properly drained from the reservoir according to EPA and AHJ
regulations. Flush the system with water and drain.
If the system will be stored in a below-freezing environment, flush the
system with an antifreeze solution and drain.
#11
DISPOSAL/REMOVAL OF PPE
When you are finished shutting down and storing the system.
Remove and dispose or clean your PPE according to your AHJ.
Akron Brass Company | akronbrass.com | 1-800-228-1161
343 Venture Blvd |Wooster, Ohio 44691
REV001 4/20
FSG-MNL-00220
FS100
QUICKSTART GUIDE
#7
TURNING THE SYSTEM ON
System is turned on via the on/off switch.
The pump will pressurize the fluid, which can be expelled via the trig-
ger on the wand.
IMPORTANT NOTICE
ATTENTION CAUTION
IMPORTANT NOTICE
IMPORTANT NOTICE
ATTENTION CAUTION
ATTENTION CAUTION
The Water Flow Experts
