NOT-AD-01
–
Novembre 2020 (version 1.0)
8
STEP 2
Place the U-shaped frame upside down over the base as indicated on the left. Screw the 3
screws through the plate, the base and the end of the base.
STEP 3
Turn the table over and place it on the floor. Make sure that all
parts are perfectly tightened before using the bed table.
Remove the locking pin from the actutor.
HEIGHT ADJUSTMENT
Simply pull the table top upwards to adjust the table height.
To lower the table, pull the adjustment lever, adjust to the correct height and then
release the lever.
CARE AND MAINTENANCE
Failure to care for and maintain your product may result in the risk of serious injury.
•
Clean the product regularly with warm water and a soft cloth. Do not use abrasive products, detergents or solvent-
based products.
•
Do not use cleaning products containing phenol or chlorine, as this could damage aluminium and polyamide
materials.
•
Dry with a clean, dry soft cloth.
•
Make sure there is no accumulation of dirt or debris around the axle, brakes or wheels.
•
Periodically check all screws and bolts for wear and strength. Replace all broken, damaged or worn parts
immediately.
•
In the event of a malfunction, do not repair the table yourself. Consult an authorised dealer.
