Pagina 9 of 20
14-4-2017
Nexus LoRaWAN
7.8 mac set/get chrx
This command is used to read or write the receive channel.
To read the channel sent: mac get chrx
To write the channel sent: mac set chrx [channel]
[channel] can have to values shown in Table 8.
The answer form the nexus is:
Channel Rx: [channel description]
Value
Channel (MHz)
00
868.100
01
868.300
02
868.500
03
867.100
04
867.300
05
867.500
06
867.700
07
867.900
10
869.525
Table 8: Channel values
7.9 mac set/get chtx
This command is used to read or write the transmit channel.
To read the channel sent: mac get chtx
To write the channel sent: mac set chtx [channel]
[channel] can have to values shown in Table 8.
The answer form the nexus is:
Channel Tx: [channel description]
7.10 mac set/get pwridx
This command is used to set the transmit power. A higher transmit power will use more energy but
you can communicate over greater distance.
To read the transmit power sent: mac get pwridx
To write the transmit power sent: mac set pwridx [power]
[power] can have a value from 00 to 0F, where 00 is the lowest power and 0F the highest power.
The answer form the nexus is:
Power: [power]
