7
PART S
PRIO R T O F IR ST US E
Remove all packaging materials and inspect the fly swatter for damages. Keep all packaging
materials away from children.
PO WER SUP PLY
This device runs on two 1.5 V batteries, type LR06/R6/AA. Open the battery compartment (5)
and insert two 1.5 V LR06/R6/AA
batteries into the corresponding slots. Pay attention to the
correct polarities (+/-), as indicated in the battery compartment. Close the battery
compartment.
O PERAT IO N
1. The net (1) of the fly swatter consists of three layers. The inner net is supplied with power.
The outer layers serve as protection from unintentional contact.
2. Set the safety switch O
O N O FF (4) to O
O N in order to turn on the fly swatter and to O
O FF
turn it off.
3. Hold the fly swatter by the handle (6) and hold the voltage button (3) down. The net is now
turned on.
4. While the net (1) is turned on, an acoustic signal tone will sound to alert children and
elderly people. The green power indicator light (2) also goes on.
5. When the net comes into contact with insects, the voltage button (3) must be pressed. As
soon as the insect comes close to the net (1), it will be killed by an electric current.
6. When hunting for insects, make sure that people, pets or objects are not unintentionally hit
with the fly swatter.
7. Do not use the fly swatter in damp environments.
1. Net
2. Green power indicator
3. Voltage button
4. Safety switch O N/O FF
5. Battery compartment
6. Handle
1
5
2
3
4
6
4. Safety switch ON/OFF
3. Voltage button
