“Last Number
Redial and/or
memory dialling
don’t work on
a PBX.”
When you first make a call, after keying in the outside
line access code (e.g. 9), press option to select
"
Insert Pause
".
access code and the telephone number. You should later
be able to redial the number.
When storing numbers in memory, you can include the
outside line access code
(e.g. 9) with each number.
Help Line:
0845 345 9677
(Local Call rate)
53
This inserts a
pause
between the
PBX use
“The Recall
function doesn’t
seem to work.”
You may need to change the recall signal length from
its default of 100 ms. Consult your PBX documentation
for help if necessary. To change the flash time, use
the [Base Set] menu (page 46).
Troubleshooting
52
If the fault persists …
Disconnect all other instruments
connected to the
same line as the iDECT K1 and see whether you can
make a call.
Disconnect the base unit
from the telephone line and
plug a different phone into the master telephone
socket. Try making a call. If this works, the line is OK.
Cleaning and care
■
Do not clean
any part of your iDECT K1 with benzene,
thinner or other solvent chemicals — this may cause
permanent damage which is not covered by the Guar-
antee. When necessary,
clean it with a damp cloth
.
■
Keep your iDECT K1 away from
hot, humid conditions
or
strong sunlight
, and
don’t let it get wet
.
■
Every effort has been made to ensure high standards of
reliability for your iDECT K1. However, if something
does go wrong, please
do not try to repair it yourself
— consult your supplier or the Help Line.
If the call does not work, and you are using a
two-way
socket adapter
, remove it and plug a telephone
directly into the socket. If the call now works, the
adapter may be faulty.
If you cannot make a call, the fault may be on the
exchange line
. Contact the service provider (the BT
engineers on 151, or your cable company).
If you still cannot identify the cause of the problem,
contact the
Help Line
on 0845 345 9677.
