IDEC WindO/I-NV4, User Manual

Page: 613 / 1738

WindO/I-NV4 User’s Manual
9-19
2 Multi-State Lamp
9
La
m
ps
2.3 Properties of Multi-State Lamp Dialog Box
This section describes items and buttons on the properties dialog box.
●
General Tab
■ Part Name
Enter a name for the part. The maximum number is 20 characters.
■ Switching Method
Specify the method to switch drawing objects from the following:
Bit Number: Switches the drawing object displayed, according to the status of the bits.
Example 1: Bit Number is selected. The bits triggered in device address D0 corresponds to the
following pictures and the OFF state is None .
Switches the picture to display according to the status of the bits.
bit15 bit0 bit3
Value of
Trigger Device Address D0
Picture
State: 0 State: 1 State: 2
(None)
OFF
Display picture
for bit 0
Display picture
for bit 1
Display picture
for bit 2
No picture
Display picture
for bit 1
Display picture
for bit 2
0001 0010 0100 1000 1110 1100
State:
0
State:
1
State:
1
State:
2
State:
2
Picture to display
Bit state of
Trigger Device Address D0
Action
I f m u l t i p l e b i t s a r e 1 ,
display the picture for the
lowest order bit.
If all bits in the device address are
0 or if a bit with no associated
picture becomes 1, display nothing.