SLIDING UNDER CABINET ORGANIZER
Installation Guide – Model CTG-00-2TCO
PARTS LIST
CONTINUED ON REVERSE SIDE
INSTALLATION INSTRUCTIONS
STEP 1 –
Place the support
brackets (#3) outside of bottom
wire basket (#1). Screw the
3/8" bolts (#4) from inside of
bottom wire basket (#1) toward
outside using screwdriver.
STEP 2 –
Place the upper basket
(#2) against the supporting
brackets (#3). Screw the 3/8"
bolts (#4) from inside of upper
wire basket (#2) toward outside
using screwdriver.
1. Bottom wire basket (1)
6. Gliders (1 left/1 right)
REQUIRED TOOLS (not provided) – Drill, 1/8" Drill Bit, Screwdriver
2. Upper wire basket (1)
7. 5/8" screws (8)
3. Support brackets (2)
8. Bottom basket mat (1)
4. 3/8" bolts (8)
9. Upper basket mat (1)
5. Template (1)
