IDEC WB1F Series, User Manual

Page: 34 / 116

2. Installation & wiring Function 4. Support tool 5. Appendix 1. Overview
3-11
Slave mode
3. 2. 3 Output data additional information
The output data additional information adds various types of data when outputting the barcode reading results data.
There are two types of formats when outputting output data to the host device.
For output data additional information settings and details, refer to "3. 5 Configuration item table" -
F
P. 3-40
"Output data additional information" .
z
Single label read and multiple label read sequential output format
Global
Prefix
Reading results data
Global
Suffix
z
If the reading results are successful, the readout data is entered in reading results data.
z
If the reading results are failed, the characters (maximum 8 characters) to output when barcode reading fails that have
been set in advance are output in reading results data.
z
The global prefix and global suffix can each be set up to 8 characters.