2 Operational Check
3 Screen and Menu
4 Appendix
1 Overview
2-6
Operation confirmation method
z
For Windows 8, 8.1/10
(1) Press the
Windows
key and the
X
key.
(2) Click
Device Manager
on the displayed menu.
(3) The
Device Manager
screen is displayed. Double-click
Ports (COM & LPT)
.
(4) For the USB type, check the port number for the port that is displayed as "IDEC Auto-ID WB1F USB CDC (COM**)".
For the RS-232 type, check the port number for the port that the RS-232-to-USB conversion cable is connected
to. ** indicates the port number.
If the port number checked in “How to check the communication port” is not displayed in the commu-
nication port on the Connection Settings screen
Close the WB1F Support Tool, cycle the power supply to the WB1F, and then start the WB1F Support Tool again.
2
After you select the communication port, click
Automatic connection
.
3
After the connection is established, click
Function
-
Control command
on the menu bar. The
Control Com-
mand
screen is displayed.
5
4
4
Click
Start reading
and the WB1F enters the reading operation state for two seconds (emitter LED turns on).
Have the WB1F read an actual barcode at this time.
