IDEC MICROSmart FC6A-D16R1CEE, Replacement Manual, Page: 34 / 46

Compatibility table (FC4A/5A series -> FC6A Plus)
34

Special devices
The available special devices for replacing are shown in the table below..
Yes: Compatible device that can be replaced automatically
Indirectly: Device that needs to be replaced manually
No: Device that cannot be replaced

Special internal relay
Replaceability
Special
internal
relay
FC4A/5A series specifications FC6A series specifications
Yes M8000 Start Control Same with FC4A/5A series.
Yes M8001 1-s Clock Reset Same with FC4A/5A series.
Yes M8002 All Outputs OFF Same with FC4A/5A series.
Yes M8003 Carry (Cy) or Borrow (Bw) Same with FC4A/5A series.
Yes M8004 User Program Execution Error Same with FC4A/5A series.
Yes M8005 Communication Error Same with FC4A/5A series.
Yes M8006 Data Link Communication Prohibit Flag (Master Station) Same with FC4A/5A series.
Yes M8007
Data Link Communication Initialize Flag (Master Station)
Data Link Communication Stop Flag (Slave Station) Same with FC4A/5A series.
Yes M8010 Status LED Same with FC4A/5A series.
No M8011 HMI Write Prohibit Flag
It is not supported and cannot be used.
M8011 is defined as reserved.
No M8012 HMI Operation Prohibit Flag
It is not supported and cannot be used.
M8012 is defined as reserved.
Yes M8013 Calendar/Clock Data Write/Adjust Error Flag Same with FC4A/5A series.
Yes M8014 Calendar/Clock Data Read Error Flag Same with FC4A/5A series.
No M8015 Calendar/Clock Data Read Stop Flag
The CPU Module uses the built-in clock,
which cannot be stopped. M8015 is
defined as reserved.
Yes M8016 Calendar Data Write Flag Same with FC4A/5A series.
Yes M8017 Clock Data Write Flag Same with FC4A/5A series.
Yes M8020 Calendar/Clock Data Write Flag Same with FC4A/5A series.
Yes M8021 Clock Data Adjust Flag Same with FC4A/5A series.
Yes M8022
User Communication Receive Instruction Cancel Flag
(Port 1) Same with FC4A/5A series.
Yes M8023
User Communication Receive Instruction Cancel Flag
(Port 2) Same with FC4A/5A series.
Yes M8024 BMOV/WSFT Executing Flag Same with FC4A/5A series.
Yes M8025 Maintain Outputs While CPU Stopped Same with FC4A/5A series.
No M8026
Expansion Data Register Data Writing Flag (Preset
Range 1) Use the recipe function. M8026 is
defined as User Communication Receive
Instruction Cancel Flag (Port 3), and
M8027 as High-speed Counter (Group
1/10).
No M8027
Expansion Data Register Data Writing Flag (Preset
Range 2)
Indirectly M8030 High-speed Counter (X0-X2) Comparison Output Reset There is no compatibility with the
high-speed counter.
Set and refer to the high-speed counter
(group 1/I0) near device allocation.
Indirectly M8031 High-speed Counter (X0-X2) Gate Input
Indirectly M8032 High-speed Counter (X0-X2) Reset Input/Preset Input
Indirectly M8033
User Communication Receive Instruction Cancel Flag
(Port 3)
Use M8026.
Indirectly M8034 High-speed Counter (X3) Comparison Output Reset There is no compatibility with the
high-speed counter.
Set and refer to the high-speed counter
(group 3/I3) near device allocation.
Indirectly M8035 High-speed Counter (X3) Gate Input
Indirectly M8036 High-speed Counter (X3) Reset Input