manualshive.com logo in svg

IDEC MICRO/I HG4G-CJT22 F-B Series, User Manual, Page: 1391 / 1665

Share
Download
IDEC MICRO/I HG4G-CJT22 F-B Series User Manual Download Page 1391

WindO/I-NV4 User’s Manual

28-43

4 E-mail Function

28

Maintenance

4.7 Restrictions of each E-mail

■

Number of destination addresses

The total number of To, Cc and Bcc data  is 100 maximum.

■

Data size

*1

■

Attachment

The maximum number of attachments is 23 total for Screenshot, Alarm Log files, Data Log files, and Operation Log 
files.
However, the number of files that can be attached varies based on the file.

*1 Data size before encoding by Base64

• When an E-mail Group is set, the number of e-mail addresses in the E-mail Group is counted.
• If the same e-mail address is used in multiple destination, the number of destination addresses will be 

counted for each destination.

Subject: 256 bytes

Body:

4,096 bytes

Screenshot:

1 max.

Alarm Log file:

1 max.

Data Log file:

20 max.

Operation Log file: 1 max.

• If a period of time or the maximum number of items are not set in the Attach Files dialog box, the entire 

history data stored in the internal memory will be attached.

• The attachment size limit varies based on the mail server. For details, contact the administrator of the 

mail server that is used.

Summary of Contents for MICRO/I HG4G-CJT22 F-B Series


































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments