B-1902-1(0)
INSTRUCTION SHEET - HS5D Series
Safety Switch
( 5 / 5 )
2016.08
8
Dimensions
(mm)
2-M4
(4.3 or M4 tapped)
Plastic,
Color:Black
Plas ic,
Color:Red
Gland port
Mounting Reference
Position
Actuator stop
(supplied with actuator)
Rubber Cushions
when installed on the door(5)
* Make sure to use the product with the mount-
ing pitch at either 12 mm or 20 mm.
* Mounting pitch is set to 12 mm in factory.
When setting the mounting pitch to 20mm,
widen the pitch of rubber cushions to 20mm.
* The actuator has movement flexibility to the
directions shown in B .
when installed on
the door(39.7)
* Make sure to use the prod-
uct with the mounting pitch
at either 12 mm or 20 mm.
* When the mounting pitch is
12 mm (factory setting),
the actuator has move-
ment flexibility to the direc
-
tions shown in A and B .
* When the mounting pitch is
20 mm, the actuator has
movement flexibility to the
directions shown in B .
Side the rubber cushions
together with the screws.
Joint
(horizontal adjustment)
(M4 holes)
Base
Angle adjusting screw
(M3 hexagon socket set screw)
Actuator stop
(supplied with
actuator)
(Φ 4 3 or M4 tapped)
(Φ 4.3 or M4 tapped)
(vertical adjustment)
Angle adjusting screw
(M3 hexagon socket set screw)
<<factory default>>
* The actuator stop is used when adjusting
the actuator position. Remove after the
actuator position is determined.
* The direction of adjustable angle can be
changed (vertical or horizontal) by
changing the insertion direction of the
joint (white plastic part). Do not lose the
joints. Actuators do not operate normally
without a joint.
http://www.idec.com
Manufacturer: IDEC CORP.
2-6-64 Nishimiyahara Yodogawa-ku, Osaka 532-0004, Japan
EU Authorized Representative:IDEC Elektrotechnik GmbH
Heselstuecken 8, D-22453 Hamburg, Germany
DECLARATION OF CONFORMITY
We, IDEC CORPORATION 2-6-64, Nishimiyahara Yodogawa-ku,Osaka 532-0004, Japan declare
under our sole responsibility that the product:
Description: Safety Switch
Model No: HS5D
to which this declaration relates is in conformity with the EC Directive on the following standard(s)
or other normative document(s). In case of alteration of the product, not agreed upon by us, this
declaration will lose its validity.
Applicable EC Directive : Low Voltage Directive (2014/35/EU)
Machinery Directive (2006/42/EC)
Applicable Standard(s) : EN 60947-5-1,GS-ET-15
8
Precaution for Disposal
Dispose of the HS5D safety switch as an industrial waste.
Actuator stop
(supplied wi h
actuator)
Base
Joint
(horizontal adjustment) (vertical adjustment)
Joint
28
20
26.4
36
6.2
5.2
R2.2
30
1
20
1
4
8
17
30
24
15
6
±1
31
91
36.2
6
±1
30
24
15
28 20
26.4
36
6.2
5 2
R2
2
91
36.2
31
29.2
4
30
1
20
1
17
1.6
7.2
7.2
2
4.5
0 8
15
28
29.6
33
20
2-
Φ
4.4
2
2
6.4
6 2
(6)
5 2
0.8
10
4-R
2.2
20
28
32.4
15 26
2-M4
(Φ4.3 or M4
tapped)
20
43.8
0.8
15.3
7 3
2-Φ10
2-Φ4.3
30
(20) 12
2-Φ9
0
8
2
15
Type : HS9Z-A51A Actuator with Rubber Cushions
Main Body
Mounting HoleLayout
20
to 22
• HS5D-
□□
RN
□
(Plastic Head)
• HS5D-
□□
ZRN
□
(Metal Head)
HS9Z-A51
Actuator
Slot-plug (Supplied)
Plastic,
Color:Red
Mounting
Reference Position
Metal,
Color:Silver
Plastic,
Color:Black
Gland port
HS9Z-A51
Actuator
Note: Use he slot-plug attached
to the safety switch to
close the un-use actuator
entry slot.
Accessories dimensions
Type : HS9Z-A51
Type : HS9Z-A52
Actuator stop
(Supplied wi h actuator)
Actuator stop
(Supplied wi h actuator)
Actuator mounting hole layout
Washer
(supplied with actuator)
Washer
(supplied with actuator)
Washer
(supplied with actuator)
Rubber Cushions
15
30
2-Φ10
2-Φ9
8.5
15.8
2
0 8
when installed
on the door(11.2)
when installed
on the door(5)
0.8
（
20
）
12
2-Φ4.3
12 or 20
2-M4
Type : HS9Z-A52A Actuator with Rubber Cushions
Type : HS9Z-A55
Angle Adjustable (vertical / horizontal) Actuator
0.8
20
°
2
R2 1
3.6
1
20
°
28.5
18 5
3
7
14.4
48
.4
38
26
23
38
2-M4
Actuator mounting hole layout
(Φ 4 3 or M4 tapped)
12 or 20
2-M4
Actuator mounting hole layout
Actuator mounting hole layout
Safety Switch dimensions
