28: AS-I
NTERFACE
M
ASTER
C
OMMUNICATION
« FC4A M
ICRO
S
MART
U
SER
’
S
M
ANUAL
»
28-21
Analog I/O Data of Analog Slaves
The I/O data for a maximum of seven analog slaves (four channels for each slave) on the AS-Interface bus is stored to AS-
Interface data registers in the CPU module. The analog slave addresses (1 to 31) are in the ascending order. The input data
for each analog slave is allocated to data registers D1700 to D1731, and the output data is allocated to D1732 to D1763.
The AS-Interface master module is compliant with analog slave profile 7.3.
•
Analog Input Data
•
The maximum number of analog slaves that can be connected to the AS-Interface bus is seven. Do
not connect eight or more analog slaves to one bus, otherwise the slaves will not function correctly.
•
When data registers D1700 through D1731 allocated to analog inputs contain 7FFF, do not use this
data for programming, because this value is reserved for a special meaning as follows:
Unused channel on a slave allocated to analog slave. (For a channel on a slave not allocated an
analog slave, the corresponding data register holds an indefinite value.)
Data over flow.
Communication between the master and analog slave is out of synchronism.
•
When using analog slaves, read the user’s manual for the analog slave to process the data properly.
Analog Input
Channel No.
Data Format
D1700
Bytes 0 and 1
Channel 1
1st data
(AI0)
D1701
Bytes 2 and 3
Channel 2
D1702
Bytes 4 and 5
Channel 3
D1703
Bytes 6 and 7
Channel 4
D1704
Bytes 8 and 9
Channel 1
2nd data
(AI1)
D1705
Bytes 10 and 11
Channel 2
D1706
Bytes 12 and 13
Channel 3
D1707
Bytes 14 and 15
Channel 4
D1708
Bytes 16 and 17
Channel 1
3rd data
(AI2)
D1709
Bytes 18 and 19
Channel 2
D1710
Bytes 20 and 21
Channel 3
D1711
Bytes 22 and 23
Channel 4
D1712
Bytes 24 and 25
Channel 1
4th data
(AI3)
D1713
Bytes 26 and 27
Channel 2
D1714
Bytes 28 and 29
Channel 3
D1715
Bytes 30 and 31
Channel 4
D1716
Bytes 32 and 33
Channel 1
5th data
(AI4)
D1717
Bytes 34 and 35
Channel 2
D1718
Bytes 36 and 37
Channel 3
D1719
Bytes 38 and 39
Channel 4
D1720
Bytes 40 and 41
Channel 1
6th data
(AI5)
D1721
Bytes 42 and 43
Channel 2
D1722
Bytes 44 and 45
Channel 3
D1723
Bytes 46 and 47
Channel 4
D1724
Bytes 48 and 49
Channel 1
7th data
(AI6)
D1725
Bytes 50 and 51
Channel 2
D1726
Bytes 52 and 53
Channel 3
D1727
Bytes 54 and 55
Channel 4
D1728
Bytes 56 and 57
—
(reser ved)
D1729
Bytes 58 and 59
—
D1730
Bytes 60 and 61
—
D1731
Bytes 62 and 63
—
Caution
Summary of Contents for FC4A-C10R2
