IDEAL U-2200IEH-XR, Installation, Operation & Maintenance Manual, Page: 12 / 23

12
Oct. 2018
U-2200IEH-XR
3. To Raise Lift & Lock
a. Push (
GREEN) UP ↑
button on the remote
‘hand held’ pendant controller.
b. Raise vehicle to the desired height, then release the
(GREEN) UP
↑
button.
c. Push the
(BLACK) PARKING
button to lower the vehicle onto the locking position, as the locking latches
will automatically engage.
4. (Emergency Button)
·
The lift can be switched off immediately by pressing down the
(RED) Emergency
button on Remote
Pendant Control.
When any emergency situation comes, press down the emergency stop button immediately to stop the
lift. When emergencies are resolved, ‘twist & pull’ the red knob to release the emergency button to
disengage the emergency stop mode.
5. To Lower Lift
Check all danger points of the lift and be sure that there are no tools, objects or people in the working
area (danger area) around the lift or under the lift before lowering
.
a. If the lift is already in the locked position (latches are engaged), press the
(GREEN) UP
↑
button to raise the
lift a short distance to disengage the latch mechanisms.
b. Then press
(BLUE) DOWN
↓
button on remote controller to lower lift to the floor, while observing the
complete lowering process to check for any unexpected movement.
c. Carefully remove the vehicle off of the lift platform, after lift is fully lowered to floor.
Center Drop Panel usage: If side extension’s Center Drop Panels are lowered (folded down), ensure to
securely latch back into level position, prior to lowering lift. Failure to do so, could result in lift, vehicle
& property damage.
Remain clear of lift when lowering vehicle. Observe pinch point warning decals.
If lift is not operating properly, DO NOT use until adjustment or repairs are made by qualified lift service
personnel.
DO NOT use the (BLACK) PARKING button instead of the (BLUE) DOWN button to lower.
NEVER press the UP or DOWN button for a long time while the lift is not moving, or the control system
will be damaged. Release button if you find the lift is not properly responding.
Once finished with lift operation, engage the emergency button and unplug the lift is recommended.
If any unsafe movement of the lift occurs, do not to operate the lift and call the local distributor for
assistance.