- 19 -
2000
1750
1500
1250
1000
750
500
250
7
8
9
4
5
6
1
0
M
P S F1
F2
F3
I
D
CP AM E
C
Stop
PROGRAMM
STEP
M
E
S
Start
2
3
Start machine
•
Main switch
E
to position "I", insert the key
D
for the control panel and turn it to the right.
•
Press
S
button
backgauge
C
moves to
the rear and searches for the reference
position, wait until a measurement is shown
in the display
O
(72 cm or 28,346 inches).
Warning!
Before storing or cutting a measurement
please check if the correct measurement
scale (72 cm or 28,346 inches) see above is
stored. For information on how to store see
bottom picture on page 24.
Cutting to specified dimensions
•
Enter dimension on the numerical key pad
W
LED "S"
N
appears.
•
Press
S
button dimension is approached,
LED "S" disappears.
•
Insert paper and move by means of the paper
knock-up block to the backgauge
I
and side
lay on the left
J
.
•
Release the cut.
Calculating
A measurement can be calculated with button
a
.E.g. 20 - 2
S
and the backgauge
advances immediately to 18.
Cut according to markings
•
Adjust the backgauge with button
P
to the
back. (The backgauge will return quicker).
•
Insert paper and move by means of the
stacking angle to the backgauge
C
and side
lay on the left
F.
•
Turn the hand-wheel
Q
to the front until the
marking on the paper to be cut is under the
cutting line indicator.
•
The more the hand-wheel
Q
is turned the faster, the backgauge will move.
For fast mode use key
R
.
•
Release the cut.
•
Operation
•
