�
•
Operation
•
B
A
C
D
E
A
B
C
IDEAL 4810-95, IDEAL 4850-95
The measurement is set with the backgauge
crank.(
A
) The symbol – rotary direction –
moves to the right on the display (
B
) (see
picture
C
). The rotary direction of the
backgauge crank (
A
) is indicated on the right.
Keep turning the backgauge crank to the right
until a measurement appears (see picture
E
).
The reference position is reached.
The cutting size can now be set with the
handle (
A
).
If the backgauge is right at the front
the
symbol – rotary direction –
will move to the
left (see picture
D
). Turn the backgauge crank
to the left until the rotary direction appears on
the right
in the display (see picture
C
).
Afterwards turn the backgauge crank to the
right until a measurements appears (see
picture
E
). The reference position is reached.
The cutting size can now be set with the
handle (
A
).
Measurement is shown on the display in
inches or cm (
B
).
IDEAL 4810-95
If display (
C
) shows "
AB
" the clamp must be
completely opened.
Turn the hand-wheel for clamping (
A
)
completely to the left until the backgauge (
B
)
is activated.
- 17
http://www.monomachines.com
http://www.monomachines.com