45-520 Adjustable Coax Cable Stripper Instructions
Step 1
• Use IDEAL coaxial stripper to step-strip cable to above dimensions.
Step 2
• Fold wire shielding back against outer insulation. Push connector onto
coaxial cable until approximately 1/8” of center conductor is protruding
from the connector.
Step 3
• Use IDEAL crimp tool with proper cavity dimensions to crimp center of
ferrule.
45-523 Coax Cassette Replacement Instructions
1. After a thousand cuts or so, the blades can become dull. By
flipping down the front flap on the tool, replacement cassettes can
be inserted. Carefully slip out the old cassette and replace.
3. After a a thousand cuts or so the blades can become dull. By
flipping down the front flap on the tool, replacement cassettes can
be inserted. Simply slip out the old cassette and replace. DO NOT
pull out with fingers on top of blades, as cutting edge can cut skin
deeply. On new coax strippers, the front flap may be difficult to
open. Use small screwdriver to pry open the first couple times.
STEP 3
STEP 2
STEP 1
1
⁄
4”
1
⁄
4”
45-074 Data T
®
-Cutter
Note:
Blades are not designed to cut steel reinforced coaxial cable or ACSR.
DO NOT USE ON LIVE CIRCUITS. Contact with electricity can cause
serious injury or death. Shut off power at the circuit breaker or remove fuse before
using this product. Serious eye injuries can be caused by cut material. Always wear
eye protection when using this tool.
For assistance, refer to an instructional book for electrical installations or consult a
qualified electrician. Handle grips are not designed for protection against electrical shock.
