15
UNIT OPERATION
The power button light and “Surgically Clean Air™” LED will turn on when power button is pressed.
Use the button to adjust the fan speed.
When the unit is first turned on the fan speed is by default on Turbo. The display indicator will show the unit
speed.
(Press button after the unit is first turned on)
the proximity sensor will be activated.
On Proximity Mode the unit will operate on a set speed and will turn itself on/off depending on movements
and motions in the vicinity of the unit.
(Press
t
o turn on the unit)
Fan speed is on Turbo
(Press one time)
Fan speed is on 'Low'
(Press second time)
Fan speed is on 'Medium'
(Press
third
time)
Fan speed is on 'High'
(Press fourth time)
Fan speed is on 'Turbo'
button for 5 seconds will lock the control panel at the selected settings.
button for 5 seconds
will lock the proximity sensor operation.
button for 10 seconds will reset the filter timer and flashing “Surgically Clean
Air™” LED.
Pressing and holding the
Pressing and holding the
Pressing and holding the
SCA14000 Cobalt Operation Manual
