www.ideal-tek.com
Switzerland
6
2. USE WITH A PC
TEK-SCOPE software
Operating System: Windows 10.
After installing the Software, you can access TEK-SCOPE functions:
Toolbar
ZOOM + ,-
: camera Zoom Wide ( Decrease ) or TELE ( Increase)
SAVE
: left Click to save live picture, choose location folder and name.
Right click on this button will start and save the video. To start the video right click once;
to end the video right click once again. (Codec needs to be installed)
FREEZE
: live picture will freeze, press the same button to go back to live again
BRIGHTNESS
: increase or decrease brightness of the live image
AF ON/OFF
: autofocus ON or OFF. When “off” it is possible to adjust manual focus with the
34
, this can
be useful if the object under the camera has different heights
CROSS
: a cross devides the monitor in 4 parts
IR CUT
: change to greyscale, it helps camera if used with IR light
STOP
: turns off digital Zoom
DRAW/MEASURE
:
to activate text, drawing and measuring functions (buttons on the right of the screen)
TEXT
: set some texts into the drawing, max 84 characters. Black text on white background
MARKTOOL
: set spots on the drawing, for soldering marking, the size follows magnification
HORIZONTAL
: horizontal measure, straight lines
VERTICAL
: vertical measure, straight lines
FREE DRAWING
: free drawing
CIRCLE
: draw circle (2 options)
RECTANGLE
: draw rectangle
ANGLED LINES
: measure in non-horizontal or vertical mode. ( 2 options)
MOUSEWHEEL
: up /down to handle Zoom in/out
WIN-CTRL-N
: information about the software version
MOUSE LEFT CLICK
: save images
Zoom in
Freeze
Brightness
Focus Adjust
IR Cut
Draw/Measure
Zoom out
Save live Picture
Autofocus ON/OFF
Cross
Stop Digital
Mark tool
Vertical
Draw circle
Angled lines
Text
Horizontal
Free Drawing Draw Rectangle
