Ideal Security SK642, Owners Manual And Set-Up Manual

Page: 6 / 33

b. Press the ARM/DISARM button to confirm that you want to enter the
PASSWORD.
c. Enter your new password then press the ARM/DISARM button to confirm
(you can choose from 3 to 6 digits for your password).
d. Record new password here:__________________
e. Press the PROG button nine (9) times to exit set-up mode.
NOTE : PASSWORD RESET
If you forget your password, open back of unit and locate the RESET button (Fig.5a).
Press and hold the PROG button, and , press and release the RESET button once.
The screen will go blank. When screen returns let go of the PROG button. You now
have the factory pre-set password of 0-0-0. This will reset the password ONLY , all other
information will remain (programmed telephone numbers and learned sensors)
2. REAL TIME SETTING (YEAR / MONTH / DATE / HOUR / MINUTES)
a. Enter password followed by PROG button nine (9) times.
b. will flash on the auto-dialer screen.
c. Press ARM/DISARM button to confirm.
d. The date will show on the auto-dialer screen as five sets of numbers: year, month,
and date followed by the time, hour and minutes (24hr time clock). The first set of
numbers will flash confirming that these can now be changed.
e. Enter correct year by pressing */UP or #/DOWN button, then press the
ARM/DISARM button. The next set of numbers will start flashing, enter the
month by pressing */UP or #/DOWN button, then press the button
ARM/DISARM , and so on until all numbers have been entered. You will
now have the correct date and time.
f. Press PROG button once (1) to exit set-up mode.
3.
TO PROGRAM EMERGENCY TELEPHONE NUMBERS
All stored telephone numbers will be dialed, in sequence, the complete amount of cycles
programmed. For example if you program 5 telephone numbers and set the cycle to 2, all
5 phone numbers will be dialed twice regardless if one of the calls is answered or not. Do