RS485 interface
–
Control and program Pan/
Tilt/Zoom (PTZ) cameras
and monitor incoming PTZ
control signals to assist in
troubleshooting analog
cameras.
Setup security
monitors
– Use the
analog Video Out port on
the tester with the test
pattern generator function
to setup security monitors.
Camera audio testing
using audio in port
–
Test microphone equipped
cameras using the tester’s
internal speaker.
Troubleshooting
HDMI
– Use the HDMI In
port, connect to any HDMI
source to isolate Network
Video Recorder (NVR) vs
monitor problems.
HDMI In
– Eliminates
the need for a separate
monitor.
HDMI output
– Display
tester screen on a larger
monitor using HDMI for
greater clarity.
Analog/AHD/CVI/
TVI video input
-
Connect to all common
analog and HD-over-coax
cameras for maximum
versatility.
Camera audio
testing using audio
out port
– Listen
to the camera audio
through the tester using
external headphones/
earbuds. Useful in noisy
environments.
Power up camera
with PoE+
– RJ-45
network port provides
PoE+ (up to 24 watts)
to the camera using
the internal battery
when network power is
unavailable.
USB charging
– High
power 2A USB port to
quickly charge devices
such as mobile phones
and tablets. (Please note
this port does not support
data transfer).
PoE+ troubleshooting
– Display the PoE+
consumption of the
attached camera in real-
time using the power
monitor tool. Displays
voltage by pair and total
wattage drawn.
Data cable testing
– RJ-45 port to perform
wiremap testing of
unshielded twisted pair
(UTP) data cabling.
Automatically identify
cross over cables and
common wiremap faults
using the Tracer/Remote.
microSD slot
– Transfer
test reports, screen
captures and video clips,
or update software using
microSD card.
12V DC power supply
– Power any camera using
the built-in 12V/2A DC
power supply.
Flashlight
– Bright LED
flashlight with 5/10/30/60
minute auto-off options.
7
Proof of Performance
