FiberTEK III
Document 164802 Iss 4
User Manual
Page 20
Chapter 5.
FiberTEK™ III Analyse Mode
The FiberTEK
™
III selects the reference level and test limits based on the test selected. When
testing fibers (LWL), the remote handset (RH) must be manually powered on.
1.
Set the cable parameters including the wavelength, and perform a field Calibration if
necessary.
2.
On the ready screen, select
Analyse
.
Fig. 15 Analyze
5.1.1
Continuous Run
This mode is used for troubleshooting. During continuous run, the measurement is repeated
until it is manually cancelled. There is no save function.
1.
In the Analyze screen select Continuous Mode.
Fig. 16 Continuous Run (Ready)
2.
Use soft key
to start the test
Summary of Contents for FiberTEK III
Page 1: ...FiberTEK III ...
Page 24: ......