6
IDEAL LIFE Communication Enabler™ ICE0001
Using Your IDEAL LIFE Communication Enabler
™
INSTALLING BATTERIES
The IDEAL LIFE Communication Enabler™ can be operated using 4 AAA batteries or a power adapter.
The Battery Indicator Light will light up when batteries need to be replaced.
•
Remove the battery compartment door on your IDEAL LIFE Communication Enabler™ by lifting the
battery door using the notch.
•
Place the batteries as instructed on the device.
•
Replace the battery compartment door and click into place.
NOTE:
Replacing the battery does not affect previous test results stored in memory of the device.
Use only new batteries of the required size and the recommended installation type. Alkaline batteries are
recommended for the best performance and battery life.
Do not mix different type, date or brand name batteries together. Be sure to follow the instructions when
installing the batteries. Batteries can leak chemicals that damage electronic parts. Leaving batteries inside
the device for long periods of time could cause damage to the device.
Please remove the batteries if you are not going to use the device for an extended period of time(i.e., 3
months or more). The batteries should be kept away from small children as they pose a choking hazard. If
swallowed, promptly see a doctor for help.
SENDING A MEASUREMENT
1.
Connect one end of the Glucose Meter Cable to your third party blood glucose meter.
2.
Connect the Power Adapter to the Power Adapter Port on the IDEAL LIFE Communication Enabler™.
3.
Press the Power Button on the IDEAL LIFE Communication Enabler™ to turn the device on. The
Power Indicator Light should turn on. Do not push the Power Button repeatedly or hold it down for
long periods of time.
4.
Plug your glucose meter’s cable into the Data Cable Port or USB Cable Port on the back of the IDEAL
LIFE Communication Enabler™. If your glucose meter’s cable does not fit into either of these ports,
you will have to use one of the provided adapter cables.
Abbott Freestyle Freedom Lite
Plug the Glucose Meter Cable into the Data Cable Port on the IDEAL LIFE Communication
Enabler™
Nipro TRUEresult
Attach the USB Adapter to the other end of the Nipro cable. Then plug the cable into the USB port
on the IDEAL LIFE Communication Enabler™
Using Your IDEAL LIFE Communication Enabler
™
