152810
UniPRO
Page 40
User Guide
RFC2544
RFC2544 is a testing methodology that comprises six subtests. RFC2544 uses Layer 4 frame headers.
Background information for the subtests can be found under the
transmission testing methods on page 19.
Set the test’s main parameters as follows: From the home
screen select SETUP>TESTS>RFC2544 and the ‘Setup:RFC2544’ screen is shown on the display (Fig
Fig 51
Fig 52
Fig 53
Select a
Target
and
Service
from the drop down
lists and enter
Pattern Data
for the frame’s payload
– up to eight hexadecimal characters.
Direction
is reported as Single Ended or
Bidirectional dependent on whether a second
MGig1 is selected as the target.
Select PROFILE (F2) to set the test to
Super-Fast, Fast or Full.
Select MORE (F1), Fig 52, and tick the check
boxes against the subtests you require; throughput
must be selected.
Select F4 to choose between:
SINGLE – Single Ended (loopback), or
BIDIR – Master to Slave
and
Slave to
Master.
Select MORE (F1), Fig 53, and below
Frame Size
tick the checkboxes next to the frame size(s) that you
want the test traffic to comprise of. The standard frames sizes are shown in Fig 53, for systems that
support larger frame sizes check the ‘User’ Frame Size and enter the size in the adjacent field. All
subtests are run separately for each selected frame size.
Summary of Contents for UniPRO MGig1
Page 1: ...UniPRO MGig1 User Guide 152810 Iss 1 UniPRO SEL1 ...
Page 67: ......
