152810
UniPRO
Page 24
User Guide
Targets
Select this option to access a table from where you may enter, edit, delete and remotely configure up to
10 targets. The targets you save here can be quickly selected when running tests.
A
B
Fig 24
To add targets proceed as follows: From the home screen select SETUP>TARGETS – the ‘Targets’
screen is shown on the display (Fig 24A). Select ADD (F1) and a pop up dialog gives you the choice of
searching for IDEAL targets or to configure the search manually. Select SEARCH from the pop up dialog
and after a scan the Discover screen is shown on the display, Fig 24B.
A
B
Fig 25
On the Discover screen, highlight the target you wish to add and select SELECT (F3). The new target
screen appears, Fig 25A, where you can reconfigure some of the new targets details before you add it to
the target list. Select APPLY (F3) and the ‘Targets’ screen is shown on the display again but with the new
target added, Fig 25B.
Summary of Contents for UniPRO MGig1
Page 1: ...UniPRO MGig1 User Guide 152810 Iss 1 UniPRO SEL1 ...
Page 67: ......
