IDEAL INDUSTRIES OTDR Technical Manual Download Page 84

Page: 84 / 123

Maintenance

IDEAL

Cleaning UI Connectors

Cleaning UI Connectors

Regular cleaning of UI connectors will help maintain optimum
performance. There is no need to disassemble the unit.

To clean UI connectors:
1.

Remove the UI from the instrument to expose the connector baseplate
and ferrule.

Moisten a 2.5 mm cleaning tip with

one drop

of isopropyl alcohol

(alcohol may leave traces if used abundantly).

Slowly insert the cleaning tip into the UI adapter until it comes out on
the other side (a slow clockwise rotating movement may help).

Gently turn the cleaning tip one full turn, then continue to turn as you
withdraw it.

MPORTANT

If any damage occurs to internal connectors, the module casing will
have to be opened and a new calibration will be required.

Push

Turn

Pull

Summary of Contents for OTDR




























































































































Search results

Summary of Contents for OTDR

Reviews:

Related manuals for OTDR

Brands by name

Popular brands

IDEAL INDUSTRIES OTDR, Technical Manual

Search results

Summary of Contents for OTDR

Reviews:

Related manuals for OTDR

Brands by name

Popular brands