background image

 

 

 

 
 

Problem 

Possible Cause 

Solution 

Has the power cord been 
disconnected? 

Plug the power cord into the 
outlet. 

Is the tank full indication 
lamp blinking? (The tank is 
full or in a wrong position.) 

Empty the water in the 
drainage tank and then 
reposition the tank. 

The unit doesn't 
operate 

Is the temperature of the 
room above 95

°

F or below 

41

°

F? 

The protection device is   
activated and the unit   
cannot be started. 

Is the air filter clogged? 

Clean the air filter as   
instructed under 
"Cleaning the dehumidifier". 

The dehumidifying   
function doesn't 
work 

Is the intake duct or   
discharge duct obstructed? 

Remove the obstruction from 
the discharge duct or intake 
duct. 

No air is 
discharged 

Is the air filter clogged? 

Clean the air filter as   
instructed under 
"Cleaning the dehumidifier". 

Is the unit tilted or 
unsteady? 

Move the unit to a stable, 
sturdy location. 

Operation is noisy 

Is the air filter clogged? 

Clean the air filter as   
instructed under 
"Cleaning the dehumidifier". 

 

 

All Ideal Air products come with a 1 year warranty, at our option we 
will either repair or replace any Ideal Air Dehumidifier that fails in 
the first 12 months from a manufacture defect.   
877-9-IDEAL-1 5408 NE 88

th

 St – Bldg A, Vancouver, WA 98665 

www.ideal-air.com

 A division of Sunlight Supply   

 

Chapter 4   

Trouble shooting 

 

Chapter 5   

Warranty 

 

Summary of Contents for 180 PINT







Reviews: