6
Transmitter:
Apollo transmitter is unique
,
it will not work with other manufacturer receivers or transmitters.
Transmitter requires batteries (purchased separately), please install before set-up.
A 6 or 7 channel transmitter is used to control Pitch, Roll, heading, height, flight mode and camera
mount 7 channel included with the (A2 ver).
Power supply:
1.
Apollo can only use
2200mah/3s
battery
,
other size batteries can’t be mounted in the body.
2.
Please turn on the transmitter before connecting the battery.
3.
After connect the battery, the quad requires a 10 second for Gyro resetting, please keep the
quad still and Level during this time.
Starting Up:
Moving the throttle stick will not start the motors, to start the quad you need to carry out the
following steps:
1.
Move the throttle stick to the lowest position
2.
(while at lowest throttle position) Move the rudder to the most left position
3.
Propellers will start to rotate at a low speed
4.
Release the rudder from full left position once motor’s start to avoid the quad rotating on the
ground.
5.
If the throttle is not moved from the lowest position within 5 seconds, the motors will shut down
automatically. (Failsafe function)
mode 1 throttle stick on
r i g h t
h a n d
mode 2
throttle stick on
l
e
f
t
h
a
n
d