background image

 

 

Page 3 of 25 

 

1. Safety Information (Continue….)                         

 

 

Do not defeat the purpose of the grounding (earthing) plug (for example, do not use a conversion plug). 

 

 

Always  plug  the  power  cord,  power  plug  or  power  adaptor  securely  and  firmly  into  an  AC  power  outlet. 
Otherwise, overheating will occur, possibly resulting in electric shock or fire. 

 

 

Do  not  pull,  bend, rest  objects  on,  or  chafe  the  power  cord  or  power  plug  or  power  adaptor.  Damage  to  the 
power cord or power plug or power adaptor can cause fire or electric shock.   

 

 

Do  not  attempt to repair  the power  cord,  power  plug  or power adaptor. If  the  power  cord  or power  plug  or 
power adaptor is damaged or frayed, contact an authorized service representative for a replacement. 

 

 

Periodically clean the power cord or power plug or power adaptor to ensure the connection is free of dust. In a 
damp environment, a contaminated connector can draw a significant amount of current that can generate heat 
and eventually cause fire if left unattended over an extended period of time. 

 

Never the power cord or power plug or power adaptor with wet hands. Electric shock will result. 

 

 

Stop  operation  immediately  if  your  product  emits  smoke,  excessive  heat,  abnormal  smell  or  unusual  noise. 
These conditions can cause fire or electronic shock. Immediately turn your product off and unplug the power 
cord or power plug or power adaptor, and contact an authorized service representative for service. 

 

 

When disconnecting this product, hold the power plug or the power adaptor instead of the power cord. Pulling 
on a power cord forcibly can damage it and cause fire or electric shock. 

 

 

To prevent fire or shock hazard, do not expose this product to rain or any type of moisture. 

 

 

If  metal  objects  or  a  liquid  get  into  this  product,  turn this  product  off  and unplug this  product immediately. 
Contact an authorized service representative for service. Operating the contaminated product can cause fire or 
electronic shock. 

 

 

Never open or remove unit covers that are screwed with screws. A high-voltage component can cause electric 
shock. 

 

 

Do not alter this product or modify any parts. Alternation or modification can cause fire or electronic shock  

 

 

Before  cleaning  this  product,  unplug  the  power  cord  or  power  plug  or  power  adaptor.  Electric  shock 
sometimes results. 

 

 

Do not open or alter the casing of this product. Electric shock or injury may result. 

 

 

Be  careful  about  the  location  of  the  power  cord,  power  plug  or  power  adaptor  to  avoid  it trips  someone  or 
causing this product to fall, etc. It may cause injury or product failure.  

 

Do not leave this product or any of its accessories on the floor to avoid someone break it when stepping on it 
or injured by tripping on it. 

 

 

Use  only  the  included  power  cord  or  power  plug  or  power  adaptor.  If  other  power  cord  or  power  plug  or 
power adaptor is used, fire or electric shock might result.  

 

 

Keep batteries away from children and pets. 

 

 

Keep the marker’s cap or battery out of reach of children to prevent swallowing. 

 

 

Be sure to use the specified type of battery only. Using incorrect type of battery can burn or leak. 

 

 

Ensure that battery is installed with correct polarity. Incorrectly installed batteries can burst or leak, resulting 
in spillage or injuries. 

 
 
 

Summary of Contents for Interactive whiteboard


























Reviews: