background image

User Manual

- 7 -

Service

STEP 6

After the speaker panel is secured tightly, test sound. When you are satisfied the speaker is operational, then affix grill. As grill is 

designed for a snug fit you’ll need to position one edge into slot first and press or squeeze around perimeter of grill, while pushing 

leading edges into grill slot.

This unit has very sophisticated circuitry and should only be serviced by a fully trained technician. This is why each unit bears the 

following label:

To prevent electric shock,do not remove covers. No user serviceable parts inside. Refer servicing to qualified technician.

Worldwide service

Service may be obtained from your local authorized service center.To obtain service, simply present your sales receipt as proof 

of purchase along with the defective unit to an authorized  service center.They will handle the necessary paperwork and repair.

Remember to transport your unit in the original factory packaging.
1.  When sending a product to authorized service center for service, be sure to fill out the service information form and include it 

inside your unit’s shipping pack. Do not send the service information form separately.

2. 

To ensure the safe transportation of your unit to the authorized service center, ship it in an original factory-packing container.

3.  Do not ship the unit in any kind of rack. Ignoring this warning may result in extensive damage to the unit and the equipment rack.

Accessories are not needed. Do not send the instruction manual, cables and any other hardware.

WEEE Mark

If you want to dispose of this product, do not mix with general household waste.There are separate collection systems for used 

electronic products in accordance with legislation under the WEEE Directive (Directive 2002/96/EC)  effective only within the Euro

-

pean Union.

NECESSARY TOOLS

• Hammer
• 

Cross-headed screwdriver

• Paint brush
• Keywhole saw
• Tape measure
• Pencil

CAUTION

!

Summary of Contents for FCS Series

















Reviews: